15.01.2019

409.1 Kkl Drivers

409.1 Kkl Drivers Rating: 6,0/10 5257 votes

VAG KKL USB 409.1 Fiat Ecu Scan KKL Switch Fiat ALFA Note: These instructions are only to be used in case the automatic driver installation is not successful. Program pembayaran listrik. These instructions are for Windows XP. Installation under Windows 98/ME/2000 is similar, but not necessarily identical. It should be noted that VAG-COM 409.1 KKL cable does not work on vehicles running on CAN-BUS System. Cable must be plugged into the vehicle with ignition ON. Test the cable with each COM Port from 1 to 4 in Windows Device Manager. Make sure that the driver is installed and configured as explained in Step 1. I bought the cable VW / AUDI KKL USB CABLE 409.1 Installed the program! I go into the settings of the program, put USB, but the program does not see the cable. I use windows XP 32 bit. In the system the driver is not installed and not installed automatically. What am I doing wrong?

409.1 Kkl Drivers License
Vagkkl Software

Welcome to join our Facebook group to get more free software download link and technician support. Synthesia 10 3 keygen.

If the PC you are installing on is not connected to the internet, you will need to download the drivers via another PC and install them before connecting the interface. Windows 7 compatible drivers are available here: Stage 2: Verify the port settings Once the drivers are installed, you need to determine which COM port has been assigned to the interface by Windows. To do this you need to go into the Windows Device Manager. Find the 'Computer' link on the desktop or the Start Menu, click the Right Mouse Button on it and choose Properties: When the 'System' box appears, click on the Device Manager link on the left hand side: Then when the Device Manager window appears, click on the arrow next to 'Ports (COM & LPT)' to see which COM port has been assigned to your interface - it will show as a 'USB Serial Port': VAG-COM 409.1 can only connect to a COM port between COM1 and COM4.

If you get a Windows message stating 'This hardware will not be installed. Contact your system administrator' then you need to do the following A) Login to Windows with Administrator rights.

Click the [ Finish] button to complete the installation. Start VAG-COM. Click the [ Options] button. In the 'Select COM Port' box, select USB. Click the [Test] button. The results should look like this (it may have additional information in the Port Test dialog).

The final step is to open the VAG-COM software by that shortcut, go into the Options page, then select the COM port your interface is configured on: Once you've selected the port, click Test, then OK. You should now be able to use the software.

Commercial use and distribution of the contents of the website is prohibited without express written consent of the author. Purchase the VAG KKL Cable here.

The following dialog should appear: 7. On the screen above: Select ' Search for the best driver in these locations' Check ' Include this location in the search:' Use the [ Browse] button to find the VAG-COM folder (Usually C:Program FilesVag-Com, unless you chose a different folder when you installed the software) Click [ OK] 8. The following dialog should appear: 9. Click the [ Next >] button.

Hi Lee, Thanks for your helpful comments. The vendor had e-mailed me directing me to the FTDI website to download the drivers - you were correct! I had opened the dongle and the chip is an FTDI 232BL.

VAG COM 409.1 Category: VAG diagnostic tool OBDII Plug: J1962 16-Pin Male (to Car) USB Port enabled See the Latest VAG COM version info: VAG COM 409.1 Function Operating Software Compatibility: Windows 98SE / ME / 2000 / NT and XP. Supports terminal (K) bus communication Terminal (L) ignition for waking up car computing system (ECU) engine control unit Has 3 different protocols with same OBD2 connector including ISO/KWP, VPW, PMW. Also supports ISO9141 protocol No DC or alternate power supply needed, just connect to your car and computer Work with most Volkswagen and Audi models sold worldwide from 1994 to current year The CVFG-A11 cable can not work if your car uses a protocol bus system like VPW, PWM or CAN -bus The K/L Diagnostic interface cables works on ISO/KWP (Key Word Protocol) that were launched after 1996.

Also, in the 'Add or Remove Programs' facility, the 'FTDI USB Serial Converter Drivers' is listed, so this looks encouraging. I've discovered that if I select COM3 and then press Test, the window says: Port Status: OK Interface: Found!

5. Connect the VAG-COM 409.1 cable to your car’s OBDII diagnostic port and turn your key to the 2nd turn to turn on your ignition. 6. Run the VCDS-Lite-1.2-Installer that you downloaded to install the VCDS-Lite software.

If I unplug the cable from the USB port, then the report says 'Ross-Tech Interface Not Found!' So, this seems to suggest something is working OK. Also, in the 'Add or Remove Programs' facility, the 'FTDI USB Serial Converter Drivers' is listed, so this looks encouraging. I've discovered that if I select COM3 and then press Test, the window says: Port Status: OK Interface: Found!

Driver Model OS Original Upload Date Last Modification Driver File File Size Compatible Computer Models Availabilty To Instalation Manager Kkl Vag Com 409.1 60402.1 For Windows 7 32 bit 8/11/2015 2/21/2017 tapc-60402.1.exe 191kb Lenovo 2689PZG, IBM 1843A19, NEC EASYNOTE PB11400006, ASUS BM5275, Acer AOA150p/BGW, HP PX813AA-ABX a1000.fi, Gigabyte M1028, Packard Bell IMEDIA MC 9601, Compaq ER043AA-UUB SR1618HL FD440,, and more. Kkl Vag Com 409.1 61.1890 For Windows 7 64 bit 11/1/2014 1/26/2017 aqaz-61.1890.exe 26kb Lenovo 7665WRU, Compaq ER100AA-ABA SR1625NX NA541, Lenovo 20AVCTO1WW, FIC LM10W, Packard Bell IMEDIA I4580 FR, M&A E10IS, HP 100-5152, LG R490-K.ARA2BA3, Lenovo 7484W76, Seneca V63909,, and more. Kkl Vag Com 409.1 621.184 For Windows 7 4/3/2016 cvfq-621.184.exe 211kb Sony VPCCW1IGX, IBM IBM System x3400 M3 Server -[7379K3G, Sony VGN-FZ32G, Dell Vostro 5470, Fujitsu FMVLX60W, WIPRO WSG37455W7-0092, Toshiba Dynabook T554/45KR, HP P9921A-ABA 743c, HP P6562es, ASUS ESC4000 G2 Series, Notebook MIM2290, Epson Endeavor Pro8000-H, HP EP074AA-ABU m7340.uk,, and more.

Features Working with a computer, this item performs the functions of a factory VAG-1551 or VAG-1552 scan tool and more. This item is fully compatible with almost all VW/AUDI/SEAT/SKODA vehicles, including those with KKL, but without CAN-BUS.

Findway VAG-COM KKL 409.1 USB Interface. After loading and installing the included driver disk for Windows 7. How to select driver? If you are looking for an update, pickup the latest one. If your driver isn't working, use the driver having the same OEM with the your laptop/desktop brand name.

• If you have installed VCDS software before or from another source, uninstall all versions of VCDS software right now, and delete directory 'C: Ross-Tech'. Then install latest version of VCDS-Lite software by clicking. For further information and instructions for troubleshooting, visit the following links: • •.

• If everything is good, it should display 'Interface Status: Found!' • You can now connect other end of cable to car. Turn on ignition. And you're ready to start diagnosing! If test is not successful — check the following: • Other software or devices using USB ports or that same COM Port could be conflicting. You should uninstall the suspected software or device for troubleshooting this problem.

409.1 Kkl Drivers License

Vagkkl Software

STEP 2: Discover Port Number that VAG-COM KKL Cable is Using Go to Control Panel. • Windows Vista/7/8/10: Control Panel » System » Device Manager • Windows XP: Control Panel » System » 'Hardware' tab » Device Manager Expand 'Other devices' or 'Ports (COM & LPT)'. Whichever contains 'USB Serial Port'. Next to 'USB Serial Port' — you'll see a number. If the COM port number is between 1-4, then everything is fine. Move onto Step 3. If the COM port number is above 4, then we'll have to change it so it's between 1-4.

I have to say their cable is a lot less aggro. I have been looking at the screenshots of the next version of VAG-COM which Uwe has posted. I may have to shell out for one because it looks really pukka. Though I may get it shipped to friends in the US as I resent paying that Scottish oaf at the treasury all my hard earned cash! Let me know how you get on. Hi Lee, Again, thank you for your kind help.

On the screen above: Select ' Search for the best driver in these locations' Check ' Include this location in the search:' Use the [ Browse] button to find the VAG-COM folder (Usually C:Program FilesVag-Com, unless you chose a different folder when you installed the software) Click [ OK] 8. The following dialog should appear: 9. Click the [ Next >] button. If you get a Windows message stating 'This hardware will not be installed. Contact your system administrator' then you need to do the following A) Login to Windows with Administrator rights. B) Go into Start -> Settings -> Control Panel -> System -> Hardware -> Driver Signing C) Select Warn and choose 'Prompt me each time to choose an action.' D) Next, repeat the driver installation starting in Step 3.

How to Install Vag com 409.1 KKL USB Drive on Windows Vag com 409.1 is KKL USB diagnostic interface for automobiles. You have to Install KKL USB Drive before you use Vag com 409.1 KKL USB. Do you know how to do it? If not, please just follow the Vag com 409.1 KKL USB Drive installtion steps beolow. VAG KKL USB 409.1 Fiat Ecu Scan KKL Switch Fiat ALFA Note: These instructions are only to be used in case the automatic driver installation is not successful. These instructions are for Windows XP.

I had opened the dongle and the chip is an FTDI 232BL. I run XP, so downloaded the driver 2.00.00 However, I still can't get it to run: Having plugged in the cable, On the VAG-COM options menu, selecting USB and 'Test' returns Port status: OK Interface: Not Found!

Windows will automatically detect the interface and attempt to find the correct drivers. 3. Extract and Open the “CDM 2.08.30 WHQL Certified for VAG 409.1” folder that you downloaded.

If install is successful, move onto Step 2. If installation fails, see below: Troubleshooting: If Drivers Failed To Install. Installation failed?.

7. Now you can start the VCDS-Lite 1.2 software from the Desktop shortcut icon. Click on Options. Under Select COM Port, choose the COM Port Number you selected prior in the Device Manager and click on Test. If the connection was successful, a box will pop up to let you know and you will be able to save the settings and begin using the software.

A message like this should appear on your PC's Taskbar: NOTE: If the new Hardware Found Wizard popup does not appear when you plug in your interface, go into Device Manager and look for the interface. In Windows XP, you can typically find the Device Manager by RIGHT-CLICKING on My Computer then selecting Manage. Your Ross-Tech USB Interface should be under Universal Serial Bus (USB) Controllers or under Other Devices. If it's there, Right-Click it and then select Update Driver.

VAG-COM requires administrator access to function, so find the shortcut to 'VAG-COM Release 409-1', click the Right Mouse Button on it, and choose Properties. Then on the Properties page, select the 'Compatibility' tab, and tick the option marked 'Run this program as an administrator': Click on 'Apply', then 'OK'. You may need to repeat this for the shortcut on the Start Menu. That should be all the preparation done.

Windows 7 protects this folder and prevents programs from writing files into it, which would prevent VAG-COM from working. So when you see the screen showing the location for installation, change it to another folder, e.g. C: Ross-Tech VAG-COM: Once you have changed the installation location, click install, and wait for it to complete installation. The installer may not give a confirmation window - it may just disappear when it is finished. Stage 4: Configure the VAG-COM software Finally there are a few changes you need to make to get the software up and running.

Instructions: • • • • Stage 1: Install the USB drivers for the interface To get your interface up and running, you need to install software device drivers for the USB interface. If you are installing the package on a PC that is connected to the internet, Windows 7 can automatically locate and install suitable drivers via Windows Update. Just connect the interface to a USB port on the computer - Windows will then show a notification that it is locating and installing device drivers.and then another message when the installation is complete.

Click [OK] and click [Save] 17. Go test it on a car.:-).